Search Results for ‘yamaha’

I was wondering if anyone knows if another manufacturer makes wheels that are the same bolt pattern as a Yamaha Warrior (2001) and a 700 Raptor (2020)? I have been searching for paddle tires (Sand Tires) with wheels for a trip to Silver Lake Michigan soon. My Warrior and Raptor have the same 9...

Hey everyone. So this is my first atv a 88 warrior 350. I test rode it when I first purchased and although it had trouble starting it eventually started up! So next day I bring my van and load it up and bring it home. The starter fuse fell off and the guy told me sometimes they short out but I...

I have an 03’ warrior 350, I have worked this thing quite a bit, All i was wondering is if and how i can make lots more power, I will provide the parts list below PARTS LIST:366 big boar (2mm over boar), polished and ported head, stage 2 cams, hot rod crank, FMF powercore 4 slip on with a FMF...

So I'm new to this forum. I hope I can articulate my issue enough to come to a solution. I have a 1995 wolverine 350 4x4. And my guess is, not a lot were made in this style. When I first got it, there were already issues with the wiring. The wiring to the bar switch was "repaired". Also...

I bought this beat up and have replaced a ton of stuff. I was changing the key ignition and accidentally touched the wires on the frame from the key ignition. The whole machine went dark. I’ve tried eliminating the ignition. I don’t have lights and won’t turn over. I can’t find any fuses except...

I was wondering if there is any lift kits for Yamaha wolverine 350 4x4, and was wondering how much it will hurt my wheeler?

Hi, so I just inherited a 87 warrior with completely chewed up wires(80% chewed up by mice) from my uncle. He said it ran like a champ then he parked it the last 3 years out of the weather. I want to completely swap out the electrical but I'm not sure what I need to get. What parts do I need...

My father was riding my quad, and stated that it made a loud pop noise. After it made the noise the quad stopped going into gear. The gearing seems to be messed up. Neutral acts like first gear and once you shift into first gear the quad dies. I currently have the quad apart. There appears to be...

So I just bought this 97 350 big bear and replaced the battery and all was working fine until today... after turning it off (key and power switch) it continued to try top start itself, there is no pull cord to start it, just the switch on the left handlebar, so now after killing the battery...

I've recently been given that "bug" for quads. I've never really been interested in them until I rode my friend's built Blaster and 400ex. Now I have to have my own. I was really considering a Warrior because of how cheap they are, their reliability, and the fact they have a reverse gear. I'm...

All gears workin fine on my wolvy. Neutral is working when i start it but when im riding i cant switch back to neutral. When im in first gear i push down the clutch to go to neutral and it goes on reverse directly. Thx 4 help.

Hello all, this is my first post here, so sorry if this is the wrong area for this, I put a thread up on ThumperTalk, but it's a bit one sided as one could imagine. Anyways, I'm 6"1, and about 190lbs. I've been riding dirt bikes since i was 6, started out on a little crf 50, then a crf 70, a kx...

6 Weeks ago my banshee developed a clutch problem. I rode down the road and when I released the clutch handle the clutch arm jammed and the clutch cable came loose. We knocked the clutch arm back, put the cable back in place, tightened and we were able able to push the clutch arm fully back and...

Hi guys and ladies :) I wish I could kick myself in the head! I pulled my harness on my YFZ450 06 with the reason just to check the wires, neaten it up, etc. I am mechanically sound, but left the problem like this for 6 months (day job is a killer) now tried to successfully reinstalled the...

Hello, I have a stock 2003 Raptor 660. The quad sat for about 4 years due to starter clutch going out. I replaced that, cleaned carbs,set float using clear tube method. Disabled parking brake, grounded the reverse rev limiter, and still the quad dies when I try to accelerate. It starts and idles...

This is my first quad. I was wondering if anyone has suggestions on what brand of oil i should use that is best for cold weather. Thank you

hey everyone first post here, I just got a Yamaha Bear Tracker 250 01' from a dude. seemed to be running good besides needing the carb cleaned. ive been tweaking with that and it seems to be running pretty well. but now im starting to notice its skipping a gear sometimes...

I recently bought a '04 YFZ 450 in great shape for $1800 and it has a lowering kit installed on it. The rear tires on it now are maxxis Razr 18x10-8. I've been shopping around for some paddle tires. I need something that won't break the bank, but are reliable. The biggest issue is what size I...

Hi i am new to this forum and was wondering about an idle problem on my carb. While it is still warming up the engine idle is perfectly normal but as it gets warmer the carbs butterfly valve just kind of sticks all the way open and basically runs full throttle. Does anyone else have this issue...

I'm not sure what year my small atv is but it is a blue moto 4 champion from what I've been told. The problem is idk the year of this atv and I need to know the year so I can order new carbureatur bolts since the old ones fell out. So how could I figure out the year of this atv? I can send pics...