Blue Traxx Forum banner

starter clutch

  1. 2002 warrior 350 starter clutch not engaging

    Yamaha YFM350 Raptor/Warrior ('87-Present)
    I replaced the one way bearing behind the flywheel with a new one, on reinstall it just spins as it did before. The quad is leaning over on its side, will that affect anything? Does that bearing need to be wet?
  2. 2002 warrior 350 starter clutch not engaging

    New Members Introduction
    I replaced the one way bearing behind the flywheel with a new one, on reinstall it just spins as it did before. The quad is leaning over on its side, will that affect anything? Does that bearing need to be wet?
  3. Warrior 350 starting problem

    Yamaha YFM350 Raptor/Warrior ('87-Present)
    I have a 95 warrior 350. I did a top end rebuild on it about 3 months ago and after I put it all back together it ran great. After about 2 weeks I noticed it getting harder and harder to start and it was making a bad clanking sound when I tried to start it. Eventually it would not start except...
  4. Aftermarket Starter clutch

    Yamaha YFM350 Raptor/Warrior ('87-Present)
    95 Warrior! What a challenge for my first Machine! I bought it knowing that it will only Tow start & needed work to get her to electric start with the button. But if the quad gets warmed up it starts right up using electric start button. I need a new starter clutch I believe. I Checked the spark...
  5. One way and flywheel

    Yamaha YFM350 Raptor/Warrior ('87-Present)
    I bought another warrior to be able to swap parts back and forth in hopes of finding out the problem with my original one. The new one has a bad oneway clutch.. As I've changed these out in a couple different 660 raptors I didn't think it would be a big deal. And wasn't except for having to but...
Top