Blue Traxx Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 14 Results
  1. Yamaha YFS200 Blaster ('88-Present)
    I've got a 99 blaster with some mods, and I need help jetting. I'm going to do a top and bottom-end rebuild this winter, and I want to make sure that I don't F it up. It will have a namura piston, wiseco rod, boyenson reeds, fmf procore 2, stock expansion chamber, UNI high flow air filter, TORS...
  2. Yamaha YFZ350 Banshee (1987-Present)
    So I got an 03 banshee and it's basically a frame and a big box of rusty parts. The chain supposedly broke before the guy pulled it apart, but I don't see any cracks. Where should I start with it? I'm pretty new to all of this, but I want to build it on my own.
  3. Yamaha YFZ350 Banshee (1987-Present)
    New to the forum, new to banshees. I'm not new raptor 660's or blaster's. Any how. I picked up a 1995 banshee, purple and yellow. Not much riding time on it at all, still has factory tires and chain etc on it. The guy I bought from had it 12 years and only put less than 40 hours on it...
  4. Yamaha YFM350 Raptor/Warrior ('87-Present)
    I just recently got a 2000 warrior as a project to do alil work on. I got it running first but didnt even pay attention to the bottom end of the motor. when i first got it started it just clanked real loud so i shut it off asap. Then i tried to shift through all of the gears so i went into...
  5. Wanted
    I bought an 04 yfz 450 and found out that the engine is shot. I am looking to buy a complete engine that has no problems and is in full running condition. the most i am looking to spend is $700. If anyone can help me that would be Great! please text me if you have anything. 401-996-6508. thanks...
  6. Top End Rebuild

    Rebuilt the top end of my YFZ 450. Learned a shit load of things in the process. Noooow i have to tune it, ugh.
  7. Top End Rebuild

    Rebuilt the top end of my YFZ 450. Learned a shit load of things in the process. Noooow i have to tune it, ugh.
  8. Top End Rebuild

    Rebuilt the top end of my YFZ 450. Learned a shit load of things in the process. Noooow i have to tune it, ugh.
  9. Top End Rebuild

    Rebuilt the top end of my YFZ 450. Learned a shit load of things in the process. Noooow i have to tune it, ugh.
  10. Top End Rebuild

    Rebuilt the top end of my YFZ 450. Learned a shit load of things in the process. Noooow i have to tune it, ugh.
  11. Yamaha YFZ450/450R (2004-Present)
    Ok im putting new rings on my piston. Since i have the top end apart i was thinking of doing the cam mod. Should I do the cam mod? if i do the cam mod will i need to do some carb work? If i did carb work what should i do b/c i have a trinity drag pipe and i was thinking about taking the airbox...
  12. Yamaha YFM350 Raptor/Warrior ('87-Present)
    i'm a newbie so here it goes... i just bought a 99 warrior at a good price thinking that it might be worth the time to fix it up. it is getting spark and has good compression, i guess but there is no gas getting to the plug. every once in awhile, backfire but thats about it. i cleaned the carb...
  13. Yamaha YFZ450/450R (2004-Present)
    Does anyone have a pdf or a link for shock rebuild. We are want to rebuild one and need some help with this. Sure we could pay some one , but wheres the fun in that. Also, a company reference that will sell us just guts/repair parts. Thanks for any help you can provide. Rob
  14. Yamaha YFM350 Raptor/Warrior ('87-Present)
    I'm just bout to rebuild my 96 warrior's top end. This inculudes all the gaskets but not replacing the piston. I am also putting in a aftermarket clutch kit and already need to replace my oil. I was wondering what is the best oil to put in that will have a long life and be best for the engine...
1-14 of 14 Results
Top