Blue Traxx Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Yamaha YFM350 Raptor/Warrior ('87-Present)
    Hello I'm new to these forms but when ever I need to know something I would Google it and you guys came up. But anyways I have a warrior 350 2000 and I noticed I have a head gasket leak from oil smoking coming out of the head so I went to go change the head gasket I put the engine to top dead...
  2. Yamaha YFM350 Raptor/Warrior ('87-Present)
    I recently acquired a 1988 Yamaha warrior from a friend that was partially taken apart due to it making a knocking noise. I own another warrior so I am somewhat familiar with them and after venturing further into the project I have found that the valve adjustment bolt has backed out and damaged...
  3. Yamaha YFZ450/450R (2004-Present)
    ALRIGHT SO, I WAS PUTTING MY HEAD BACK TOGETHER,,(oops friken cabs lock!) and when i finished , one of the valves was open! i took the cam covers off and on but still no luck, it seems the lobe is pushing agaisnt the shim i think thats what its called when i tighten the cover! helpppp i have...
  4. Yamaha YFZ350 Banshee (1987-Present)
    Just bought a trinity stage 4 head for my shee, didn't realize it took special nuts and I am not willing to pay $99 for new ones from trinity. Looking to buy some used or any suggestions to fab, modify, or adapt something to bolt this head down and get riding. Thanks
  5. Parts for Sale
    I have for sale an 04 yfz 450 engine. It does not run and needs parts to be replaced. it is in pieces so the take apart time will not be necessary. Here are a list of the good parts on it: The Complete Head The Cylinder Clutch basket Flywheel and gear Transmission main shaft and second shaft...
  6. Yamaha YFZ350 Banshee (1987-Present)
    ok new to this whole thing just bought a banshee 3 weeks ago..LOVE IT! a week ago im riding and the throttle sticks i get it home and notice the slide pin is moving and the slide turned around and got stuck on it. Coolant was leaking from the two bolts in the center of the head. Figured blown...
  7. Yamaha YFM350 Raptor/Warrior ('87-Present)
    Hi, just rebuilt my engine (wiesco crank and rod kit, rings, new gasket kit top and bottom, valve stem oil seals, grinded valves) my problem is this, my head is leaking air from the right hand side(not the timing chain side) where the head meets the cylinder. I have a tusk head gasket on and it...
1-7 of 7 Results