Parking brake elimination - Page 3 - Yamaha ATV Forum
 1Likes
Reply
 
LinkBack Thread Tools Display Modes
post #41 of 61 Old 11-20-2011, 11:39 AM
Junior Member
 
Join Date: Nov 2011
Posts: 1
350 Warrior Missing issue

This issue seems to be the fix a lot of people have been looking for "Warrior missing issue"..... runs great till you try full throttle starts to sputter, miss, backfire..ect. Been down the carb. jetting ..float adjustment...clean out...but did not solve the issue. Sure seemed as carb issue but this makes sense to try, I think eliminated the carb as the culprit.... I have had the bike along time it has been missing since I got it.
So I'm going see if I can get it to stop missing with the above fix ....
If it fixes it. I'll post pictures.......
Anymore tips on the fixes would be appreciated???
Curstero is offline  
Sponsored Links
Advertisement
 
post #42 of 61 Old 11-22-2011, 05:08 AM
Senior Member
 
secaIIwarrior's Avatar
 
Join Date: Oct 2011
Location: Litchfield, Oh.
Posts: 132
Hey digger, do you ever feel like your repeating yourself?
Hey digger, do you ever feel like your repeating yourself?
Hey digger, do you ever feel like your repeating yourself?
Hey digger, do you ever feel like your repeating yourself?
secaIIwarrior is offline  
post #43 of 61 Old 11-22-2011, 08:00 AM
Crowd Control
 
diggerzmound's Avatar
 
Join Date: Oct 2002
Location: Nebraska
Posts: 8,515
Garage
Send a message via AIM to diggerzmound Send a message via Yahoo to diggerzmound
Oh Sometimes.









Sometimes...

01' Raptor 720, Stage 2, FCR'd
97' 250 Vitos Blaster
06' Rhino 450
94' Banshee T-5's, Vforce, ported, Cool Head, 2-1
06' Wolverine 450 - Stock!
06' LTZ 440
94' Vmax4 750, 96' 600 MountainMax, 07' Nytro(b00sTed)
06' Vmax 1200
diggerzmound is offline  
Sponsored Links
Advertisement
 
post #44 of 61 Old 02-05-2012, 05:01 PM
Junior Member
 
Join Date: Feb 2012
Location: Chicago, IL
Posts: 4
Add me to the list of people that this mod has helped...I had a 96 Warrior that has not been run consistently for nearly 10 years...rebuilt the carb, fought issues with backfires, chased what I thought was jetting issues and then found this...took 5 minutes, fired it up and idles just like it used to!

1996 Yamaha Warrior (stock)
pedechad is offline  
post #45 of 61 Old 02-06-2012, 07:12 PM
Member
 
BlueBloodInTheVeins's Avatar
 
Join Date: Feb 2012
Location: PA. Hill's
Posts: 79
Green/Yellow....Black----"01" warrior----Brake Switch

"If your thinking on takeing that hill i beat ya!"..........
BlueBloodInTheVeins is offline  
post #46 of 61 Old 02-19-2012, 11:03 PM
Junior Member
 
Join Date: Feb 2012
Posts: 2
diggerz i hope this isnt to early to say but ur little diagram seems to have fixed my prob. thanx man ur the shit
DnAsTat2s is offline  
post #47 of 61 Old 02-23-2012, 05:08 PM
Junior Member
 
Join Date: Feb 2012
Posts: 25
Honestly i took the cable out the handle bar part and cut it with bolt cutters at the rear... simply done lol
YFM350xDLOWE likes this.
Leeland94 is offline  
post #48 of 61 Old 07-19-2013, 03:58 PM
Junior Member
 
Join Date: May 2013
Location: Dalton,GA
Posts: 8
My '87 runs the same with the wires bypassed or unplugged? Like crap. I just installed an aftermarket stator. Was very hard to start, timing advanced a lot. But, it ran amazing! I took the pickup coils and flipped them, and starts good, but runs like crap.
automan is offline  
post #49 of 61 Old 07-19-2013, 09:52 PM
Crowd Control
 
diggerzmound's Avatar
 
Join Date: Oct 2002
Location: Nebraska
Posts: 8,515
Garage
Send a message via AIM to diggerzmound Send a message via Yahoo to diggerzmound
I would run tests real quick. Check the spark plug boot and put a new plug in it.

01' Raptor 720, Stage 2, FCR'd
97' 250 Vitos Blaster
06' Rhino 450
94' Banshee T-5's, Vforce, ported, Cool Head, 2-1
06' Wolverine 450 - Stock!
06' LTZ 440
94' Vmax4 750, 96' 600 MountainMax, 07' Nytro(b00sTed)
06' Vmax 1200
diggerzmound is offline  
post #50 of 61 Old 08-27-2013, 04:21 PM
Member
 
THORrider05's Avatar
 
Join Date: Aug 2013
Location: Antelope Valley
Posts: 37
I have a quick question, for my 87 i removed the stock clutch perch and installed a dirtbike perch so my question is do i need to do anything with the clutch safety switch? When i purchased the quad the prev owner installed a different clutch lever so the e-brake was no functional, i now have the clutch safety switch zip ty'd to the bars as i didnt want to cut any wires unless need be. The quad runs just as it did with the stock perch but should i splice the wires together on the clutch safety switch?
THORrider05 is offline  
post #51 of 61 Old 03-26-2015, 06:17 PM
Junior Member
 
Join Date: Mar 2015
Posts: 1
blah 95 warrior 350 stuck on limiter please help!!

95 warrior 350 new stator new pick up coil new ignition coil new plug now wont rev past an idle sounds like a limiter and doesn't change in gear in neutral or reverse. before I get the cdi is there anything else? clutch switch plugged into it self on harness threw away broken switch. don't see any wires for park brake switch or anything WTFF!!!!!!!!!!!!!
Whipitlikeabike is offline  
post #52 of 61 Old 03-27-2015, 10:30 AM
Crowd Control
 
diggerzmound's Avatar
 
Join Date: Oct 2002
Location: Nebraska
Posts: 8,515
Garage
Send a message via AIM to diggerzmound Send a message via Yahoo to diggerzmound
Make sure the reverse wire on the reverse shifter isn't loose or broken.

01' Raptor 720, Stage 2, FCR'd
97' 250 Vitos Blaster
06' Rhino 450
94' Banshee T-5's, Vforce, ported, Cool Head, 2-1
06' Wolverine 450 - Stock!
06' LTZ 440
94' Vmax4 750, 96' 600 MountainMax, 07' Nytro(b00sTed)
06' Vmax 1200
diggerzmound is offline  
post #53 of 61 Old 12-22-2016, 08:47 PM
Junior Member
 
Join Date: Dec 2016
Posts: 1
Old thread

I realize this is an really old and redundant thread but damn if it didn't solve all my issues. Total design flaw but if you follow the steps my quad at least runs better than when I bought it!
Bink2040 is offline  
post #54 of 61 Old 05-14-2018, 08:21 AM
Junior Member
 
Join Date: May 2018
Posts: 5
would you make another diagram I didn't get the first one !!
YFM350xDLOWE is offline  
post #55 of 61 Old 05-14-2018, 08:22 AM
Junior Member
 
Join Date: May 2018
Posts: 5
Need your help!

Quote:
Originally Posted by diggerzmound View Post
Make sure the reverse wire on the reverse shifter isn't loose or broken.
Maybe I'm slow but I just am not that great with mechanics and wires, sorry -___-
YFM350xDLOWE is offline  
post #56 of 61 Old 05-14-2018, 12:58 PM
Senior Member
 
Join Date: Feb 2015
Location: southern oregon
Posts: 1,855
Garage
tell me what you need and i will walk you through it. i am not sure what diagram you are looking for. i wont be home until Wednesday though
cory52000 is offline  
post #57 of 61 Old 05-20-2018, 06:56 AM
Junior Member
 
Join Date: May 2018
Posts: 5
Quote:
Originally Posted by cory52000 View Post
tell me what you need and i will walk you through it. i am not sure what diagram you are looking for. i wont be home until Wednesday though
Thanks man but I am trying to install my ASV aftermarket clutch perch and brake lever. But there is something stopping me, idk what I'm doing, and everything is still stock. It's a 98 Warrior 350. I want to remove the parking brake. There's already a block off installed, but the stock perch still has all the wires from the parking brake (and clutch cable) connected. Also, have a new clutch cable trying to install as well. What's my next step or few steps toward getting this achieved ?? Kinda lost here man and I don't wanna mess up my wire harness.
YFM350xDLOWE is offline  
post #58 of 61 Old 05-20-2018, 08:59 AM
Senior Member
 
Join Date: Feb 2015
Location: southern oregon
Posts: 1,855
Garage
if it has a block off the parking brake wires you need to worry about are probably unplugged anyway. either way it is very simple.
1 remove the front plastic
2 follow the wires out of the parking brake down to the connector and simply unplug it
3 follow the wires out of the clutch perch, you will find 2 bullet style connectors. there will be a male and female connector on both side of the connection. take the male connector from the harness side and plug it into the female connector on the harness side and you are good to go.

be careful after bypassing the clutch switch because you machine will start in gear now. plugging the 2 connectors together trick the machine into thinking the clutch is pulled in all the time. there is no way to mess up the harness but if you dont get the wires connected correctly the machine will only start in neutral. the clutch cable is pretty simple. shorten the inline adjuster in the cable as much as possible, line up the screw and adjuster nut and remove the cable from the perch, unhook the other end and reinstall. you will need to adjust the clutch cable free play after installing the new cable and perch.

i suggest you download the manual in the sticky above and read the section on replacing the clutch cable and adjusting the clutch if you have never done it before. if you are new to this type of work and want to keep your machine in top condition i suggest spending the 30 bucks and ordering the clymer paper manual . it will make you machine last longer and be more dependable. let me know if you need anything else
cory52000 is offline  
post #59 of 61 Old 05-22-2018, 03:05 AM
Junior Member
 
Join Date: May 2018
Posts: 5
Quote:
Originally Posted by cory52000 View Post
if it has a block off the parking brake wires you need to worry about are probably unplugged anyway. either way it is very simple.
1 remove the front plastic
2 follow the wires out of the parking brake down to the connector and simply unplug it
3 follow the wires out of the clutch perch, you will find 2 bullet style connectors. there will be a male and female connector on both side of the connection. take the male connector from the harness side and plug it into the female connector on the harness side and you are good to go.

be careful after bypassing the clutch switch because you machine will start in gear now. plugging the 2 connectors together trick the machine into thinking the clutch is pulled in all the time. there is no way to mess up the harness but if you dont get the wires connected correctly the machine will only start in neutral. the clutch cable is pretty simple. shorten the inline adjuster in the cable as much as possible, line up the screw and adjuster nut and remove the cable from the perch, unhook the other end and reinstall. you will need to adjust the clutch cable free play after installing the new cable and perch.

i suggest you download the manual in the sticky above and read the section on replacing the clutch cable and adjusting the clutch if you have never done it before. if you are new to this type of work and want to keep your machine in top condition i suggest spending the 30 bucks and ordering the clymer paper manual . it will make you machine last longer and be more dependable. let me know if you need anything else
Alright, to be clear there is a block off plate on the rear , I unplugged the parking brake cable bullet connections and plugged the two from the wire harness together. However, when I try to start it up in neutral regularly the quad doesnít idle anymore, but revs just fine. It just dies out ..What have I done wrong ? The asv perch is installed properly along with new clutch cable. ALSO, I canít seem to find the white cable connect that needs to be simply unplugged ... My wire harness is covered in electrical tape at the base . Should I try to remove the tape and look for the white connector wires there and tape it back up. Only wires coming from harness are key ignition , starter cable, the two bullet connector I plugged into each other, and other misc wires grounded to front frame but no white connector to unplug ..?? It was running fine before the removal of the parking brake cable, just with slight rev limiting in certain gears like 3rd or 4th sometimes in 2nd.. any ideas of whatís going on ?
YFM350xDLOWE is offline  
post #60 of 61 Old 05-22-2018, 09:18 AM
Crowd Control
 
diggerzmound's Avatar
 
Join Date: Oct 2002
Location: Nebraska
Posts: 8,515
Garage
Send a message via AIM to diggerzmound Send a message via Yahoo to diggerzmound
It sounds like you did the delete correct. I would be suspicious of something else going on. I would darn sure untape the harness and inspect. any moisture on open connections can cause intermittent problems.

01' Raptor 720, Stage 2, FCR'd
97' 250 Vitos Blaster
06' Rhino 450
94' Banshee T-5's, Vforce, ported, Cool Head, 2-1
06' Wolverine 450 - Stock!
06' LTZ 440
94' Vmax4 750, 96' 600 MountainMax, 07' Nytro(b00sTed)
06' Vmax 1200
diggerzmound is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha ATV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
parking brake Leavin-BHND Yamaha YFM660R Raptor (2001-2005) 18 08-13-2004 08:40 PM
Parking Brake Starscream Yamaha YFZ350 Banshee (1987-Present) 3 08-12-2003 10:10 PM
PARKING BRAKE ELIMINATION 31raptor Yamaha YFM660R Raptor (2001-2005) 22 10-27-2002 11:39 AM
Park brake elimination quisenb1 Yamaha YFZ350 Banshee (1987-Present) 5 10-25-2002 07:17 PM
RAPTOR E-BRAKE ELIMINATION 31raptor Bluetraxx.com Site Help and Support 3 10-17-2002 02:09 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome