2000 Yamaha wolverine 350 no spark or neutral light ??
Hello everyone. First time posting. I have a 2000 Yamaha Wolverine 350. I bought this without it started knowing it had no spark. It turns over. I thought it was something easy I change the ignition coil and the stator. Still no spark or neutral light. I just noticed that the back light comes on when turning the lights on but the front lights don't. I have not checked to see if the bulbs were burned out yet or not. Any help would be great . Thanks
did you use one of the cheap ebay stators. some of those have the red and white wire on the pickup swapped. i have not heard of it in the wolverine but it is common in the warrior. might be worth looking at. sounds like more of a wiring issue than a cdi i would at least figure out why they are not on before i ordered a cdi
Thank you guys. I put a new CDI box on and now it has spark. But now when I turn it over it makes a noise like somethings hitting something inside. Like a hammer. I took off the cover were the stator is and see no sign of anything hitting. Well the cover was off I turned it over and no sound. I put the cover back on and get the sound again?????