Blue Traxx Forum banner

float level

12K views 0 replies 1 participant last post by  dan68rs 
#1 · (Edited)
Im setting my float level on my 98 warrior and have some questions, the book states that it should be between 11.2 - 13.4 or something close to that. Also it show if you use a clear tube on the bowl drain the level should be around 3-4 mm below the carb base, my problem is that I have my float set at 15 mm and when I look at it with the clear tube it is sitting right at the point where the bowl meets the carb. 15mm seems a bit high but just thought I would see if anyone else has any ideas on this.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top